commit 5f911581cfb399d6fab0cfa9fcb6d92bef6d3be8 Author: Jiayi Yin Date: Sun May 18 18:53:04 2025 +0000 转换LFS仓库为普通仓库 diff --git a/5.10.0-4.9.0.tar.gz b/5.10.0-4.9.0.tar.gz new file mode 100644 index 0000000..719a046 Binary files /dev/null and b/5.10.0-4.9.0.tar.gz differ diff --git a/README.en.md b/README.en.md new file mode 100644 index 0000000..52e2206 --- /dev/null +++ b/README.en.md @@ -0,0 +1,31 @@ +# raspberrypi-kernel + +#### Description + +Kernel Image of Raspberry Pi. + +The `kernel.tar.gz` is from . After you put your public ssh key into your account in gitee, you can obtain `kernel.tar.gz` by executing command `. SOURCE`. You can directly use the `kernel.tar.gz` in this repository instead. + +#### Software Architecture + +AArch64 + +#### Installation + +`dnf install raspberrypi-kernel` + +#### Instructions + +1. The version of raspberrypi kernel is in the front of `.raspi.aarch64` such as `5.10.0-4.0.0.1.raspi.aarch64`. +2. The module files will be installed into `/lib/modules/` such as `/lib/modules/5.10.0-4.0.0.1.raspi.aarch64`, where `5.10.0-4.0.0.1.raspi` is the version of raspberrypi kernel. +3. The image file will be installed into `/boot/` such as `/boot/vmlinuz-5.10.0-4.0.0.1.raspi.aarch64`. Meanwhile, the `/boot/kernel8.img` will be overrided by the image file. +4. The device tree files will be installed into `/boot/` such as `/boot/dtb-5.10.0-4.0.0.1.raspi.aarch64`. Meanwhile, the `.dtb` files and `overlays` folder in this `dtb-5.10.0-4.0.0.1.raspi.aarch64` directory will replace the corresponding files in `/boot/`. + + + +#### Contribution + +1. Fork the repository +2. Create Feat_xxx branch +3. Commit your code +4. Create Pull Request diff --git a/README.md b/README.md new file mode 100644 index 0000000..7ce698e --- /dev/null +++ b/README.md @@ -0,0 +1,31 @@ +# raspberrypi-kernel + +#### 介绍 + +Raspberry Pi 内核映像文件。 + +`kernel.tar.gz` 来自 仓库，将 SSH 公钥添加到 gitee.com 的账户中后，可通过执行 `. SOURCE` 来获取 `kernel.tar.gz`。也可以采用本仓库通过 Git LFS 上传的 `kernel.tar.gz`。 + +#### 软件架构 + +AArch64 + +#### 安装教程 + +`dnf install raspberrypi-kernel` + +#### 使用说明 + +安装 raspberrypi-kernel 后， + +1. 内核版本号后缀增加 `.raspi` 标识，形如 `5.10.0-4.0.0.1.raspi.aarch64`。 +2. 内核模块安装在 `/lib/modules/` 目录下，对应文件夹名称同内核版本号，如 `5.10.0-4.0.0.1.raspi.aarch64`。 +3. 内核映像文件在 `/boot/` 目录下，映像文件名形如 `vmlinuz-5.10.0-4.0.0.1.raspi.aarch64`。同时，该文件会替换原来的 `/boot/kernel8.img` 文件。 +4. 设备树文件在 `/boot/` 目录下的文件夹下，该文件夹名称形如 `dtb-5.10.0-4.0.0.1.raspi.aarch64`。同时，该文件夹下的 `.dtb` 文件和 `overlays` 文件夹会替换 `/boot/` 下对应的文件。 + +#### 参与贡献 + +1. Fork 本仓库 +2. 新建 Feat_xxx 分支 +3. 提交代码 +4. 新建 Pull Request diff --git a/raspberrypi-kernel.spec b/raspberrypi-kernel.spec new file mode 100644 index 0000000..461e578 --- /dev/null +++ b/raspberrypi-kernel.spec @@ -0,0 +1,187 @@ +%global Arch $(echo %{_host_cpu} | sed -e s/i.86/x86/ -e s/x86_64/x86/ -e s/aarch64.*/arm64/) + +%global KernelVer %{version}-%{release}.raspi.%{_target_cpu} + +%global hulkrelease 4.9.0 + +%global debug_package %{nil} + +Name: raspberrypi-kernel +Version: 5.10.0 +Release: %{hulkrelease}.4 +Summary: Linux Kernel +License: GPLv2 and Apache-2.0 and MIT +URL: http://www.kernel.org/ +Source0: https://gitee.com/openeuler/kernel/repository/archive/%{version}-%{hulkrelease}.tar.gz + +BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, tar +BuildRequires: bzip2, xz, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk +BuildRequires: gcc >= 3.4.2, binutils >= 2.12 +BuildRequires: hostname, net-tools, bc +BuildRequires: xmlto, asciidoc +BuildRequires: openssl-devel +BuildRequires: hmaccalc +BuildRequires: ncurses-devel +BuildRequires: elfutils-libelf-devel +BuildRequires: rpm >= 4.14.2 +BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison +BuildRequires: audit-libs-devel +BuildRequires: pciutils-devel gettext +BuildRequires: rpm-build, elfutils +BuildRequires: numactl-devel python3-devel glibc-static python3-docutils +BuildRequires: perl-generators perl(Carp) libunwind-devel gtk2-devel libbabeltrace-devel java-1.8.0-openjdk +AutoReq: no +AutoProv: yes + +Provides: raspberrypi-kernel-aarch64 = %{version}-%{release} + +ExclusiveArch: aarch64 +ExclusiveOS: Linux + +%description +The Linux Kernel image for RaspberryPi. + +%prep +%setup -q -n kernel-%{version} -c +mv kernel linux-%{version} +cp -rl linux-%{version} linux-%{KernelVer} + +cd linux-%{KernelVer} + +find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null +find . -name .gitignore -exec rm -f {} \; >/dev/null + +%build +cd linux-%{KernelVer} + +perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.raspi.%{_target_cpu}/" Makefile + +make ARCH=%{Arch} %{?_smp_mflags} bcm2711_defconfig + +make ARCH=%{Arch} %{?_smp_mflags} KERNELRELEASE=%{KernelVer} + +%install +cd linux-%{KernelVer} + +## install linux + +make ARCH=%{Arch} INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=%{KernelVer} +rm -rf $RPM_BUILD_ROOT/lib/modules/%{KernelVer}/source $RPM_BUILD_ROOT/lib/modules/%{KernelVer}/build + +mkdir -p $RPM_BUILD_ROOT/boot +TargetImage=$(make -s image_name) +TargetImage=${TargetImage%.*} +install -m 755 $TargetImage $RPM_BUILD_ROOT/boot/vmlinuz-%{KernelVer} +install -m 644 .config $RPM_BUILD_ROOT/boot/config-%{KernelVer} +install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-%{KernelVer} + +mkdir -p $RPM_BUILD_ROOT/boot/dtb-%{KernelVer}/overlays +install -m 644 $(find arch/%{Arch}/boot/dts/broadcom/ -name "*.dtb") $RPM_BUILD_ROOT/boot/dtb-%{KernelVer}/ +install -m 644 $(find arch/%{Arch}/boot/dts/overlays/ -name "*.dtbo") $RPM_BUILD_ROOT/boot/dtb-%{KernelVer}/overlays/ +if ls arch/%{Arch}/boot/dts/overlays/*.dtb > /dev/null 2>&1; then + install -m 644 $(find arch/%{Arch}/boot/dts/overlays/ -name "*.dtb") $RPM_BUILD_ROOT/boot/dtb-%{KernelVer}/overlays/ +fi +install -m 644 arch/%{Arch}/boot/dts/overlays/README $RPM_BUILD_ROOT/boot/dtb-%{KernelVer}/overlays/ + +%postun +version_old=0 +if [ "$1" == "0" ]; then + version_old=old +else + version_tmp=0 + name_len=`echo -n %{name}-|wc -c` + for item in `rpm -qa %{name} 2>/dev/null` + do + cur_version=${item:name_len} + cpu_version=${cur_version##*.} + if [ "$cpu_version" == "%{_target_cpu}" ]; then + cur_version=${cur_version%.*} + cur_version=$cur_version.raspi.$cpu_version + if [[ "$cur_version" != "%{KernelVer}" && "$cur_version" > "$version_tmp" ]]; then + version_tmp=$cur_version + fi + fi + done + if [[ "$version_tmp" < "%{KernelVer}" ]]; then + version_old=$version_tmp + fi +fi +if [ "$version_old" != "0" ]; then + if [ -f /boot/vmlinuz-$version_old ] && [ -d /boot/dtb-$version_old ] && ( [ "$version_old" == "old" ] || [ -d /lib/modules/$version_old ] ); then + ls /boot/dtb-$version_old/overlays/*.dtbo > /dev/null 2>&1 + if [ "$?" == "0" ]; then + ls /boot/dtb-$version_old/*.dtb > /dev/null 2>&1 + if [ "$?" == "0" ]; then + rm -rf /boot/*.dtb /boot/overlays /boot/kernel8.img + mkdir /boot/overlays + install -m 755 /boot/vmlinuz-$version_old /boot/kernel8.img + for file in `ls /boot/dtb-$version_old/*.dtb 2>/dev/null` + do + if [ -f $file ]; then + install -m 644 $file /boot/`basename $file` + fi + done + install -m 644 $(find /boot/dtb-$version_old/overlays/ -name "*.dtbo") /boot/overlays/ + if ls /boot/dtb-$version_old/overlays/*.dtb > /dev/null 2>&1; then + install -m 644 $(find /boot/dtb-$version_old/overlays/ -name "*.dtb") /boot/overlays/ + fi + install -m 644 /boot/dtb-$version_old/overlays/README /boot/overlays/ + else + echo "warning: files in /boot/dtb-$version_old/*.dtb missing when resetting kernel as $version_old, something may go wrong when starting this device next time." + fi + else + echo "warning: files in /boot/dtb-$version_old/overlays missing when resetting kernel as $version_old, something may go wrong when starting this device next time." + fi + else + echo "warning: files missing when resetting kernel as $version_old, something may go wrong when starting this device next time." + fi +fi + +%posttrans +if [ "$1" == "1" ]; then + if [ ! -f /boot/vmlinuz-old ] && [ -f /boot/kernel8.img ]; then + mkdir /boot/dtb-old + mv /boot/*.dtb /boot/dtb-old + mv /boot/overlays /boot/dtb-old/ + mv /boot/kernel8.img /boot/vmlinuz-old + fi +fi +rm -rf /boot/*.dtb /boot/overlays /boot/kernel8.img +mkdir -p /boot/overlays +install -m 755 /boot/vmlinuz-%{KernelVer} /boot/kernel8.img +for file in `ls /boot/dtb-%{KernelVer}/*.dtb 2>/dev/null` +do + if [ -f $file ]; then + install -m 644 $file /boot/`basename $file` + fi +done +install -m 644 $(find /boot/dtb-%{KernelVer}/overlays/ -name "*.dtbo") /boot/overlays/ +if ls /boot/dtb-%{KernelVer}/overlays/*.dtb > /dev/null 2>&1; then + install -m 644 $(find /boot/dtb-%{KernelVer}/overlays/ -name "*.dtb") /boot/overlays/ +fi +install -m 644 /boot/dtb-%{KernelVer}/overlays/README /boot/overlays/ + + +%files +%defattr (-, root, root) +%doc +/boot/config-* +/boot/System.map-* +/boot/vmlinuz-* +/boot/dtb-* +/lib/modules/%{KernelVer} + +%changelog +* Tue Mar 9 2021 Yafen Fang - 5.10.0-4.9.0.4 +- update kernel version to openEuler 5.10.0-4.9.0 + +* Thu Mar 4 2021 Yafen Fang - 5.10.0-4.7.0.3 +- update kernel version to openEuler 5.10.0-4.7.0 (change source0 to openeuler/kernel) +- apply patches of Raspberry Pi (commits from f45e8420c8d3a12837817a5de5985af2e95757d6 to ec967eb45f8d4ed59bebafb5748da38118383be7) + +* Fri Feb 26 2021 Yafen Fang - 5.10.0-4.3.1.2 +- update kernel version to openEuler 5.10.0-4.3.0 +- apply patches of Raspberry Pi (commits from 5cd836735908ba0e2ad6f65d9b3f40eaa8253842 to 12fdeddcde1ce67177ae0e13931ff24944015625) + +* Mon Feb 22 2021 Yafen Fang - 5.10.0-4.0.0.1 +- update kernel version to openEuler 5.10.0-4.0.0 diff --git a/raspberrypi-kernel.yaml b/raspberrypi-kernel.yaml new file mode 100644 index 0000000..78109a2 --- /dev/null +++ b/raspberrypi-kernel.yaml @@ -0,0 +1,5 @@ +git_url: https://gitee.com/openeuler/raspberrypi-kernel +version_control: gitee +src_repo: openeuler/raspberrypi-kernel +tag_prefix: ^ +seperator: . \ No newline at end of file